diff --git a/docs/tutorials/extras/pt100.md b/docs/tutorials/extras/pt100.md
index 0629310..c8e8639 100644
--- a/docs/tutorials/extras/pt100.md
+++ b/docs/tutorials/extras/pt100.md
@@ -1,4 +1,4 @@
-### PT100 RTD Thermal Sensor Integration
+# PT100 RTD Thermal Sensor Integration
 
 The EasyPiezi (Rev 1.1.x and Rev 2.x.x) utilize an extra amp channel to allow the use of a PT100 RTD Thermal sensor with minimal additional components. The circuit is based on E3D's daughterboard designed for PT100 sensors.
 
@@ -6,4 +6,4 @@ The EasyPiezi (Rev 1.1.x and Rev 2.x.x) utilize an extra amp channel to allow th
 
 The circuit outputs a DC voltage that corresponds to the RTD's change in resistance, which in turn changes based on the temperature of the RTD. This output shares a common ground with other parts of the circuit, so only one additonal output pin is required to utilize it.
 
-As this is a direct voltage reading, the usual TH# inputs on most controllers cannot be used (unless the user removes the pullup resistor attached to the input). Instead, the PT100 input must be attached to a bare analog input pin (any of the pins labeled A##, like A5 on Atmega controllers)
\ No newline at end of file
+As this is a direct voltage reading, the usual TH# inputs on most controllers cannot be used (unless the user removes the pullup resistor attached to the input). Instead, the PT100 input must be attached to a bare analog input pin (any of the pins labeled A##, like A5 on Atmega controllers)