Circuit-Forge/easypiezi
3
0
Fork 0
Code Issues 4 Pull requests Projects Releases Packages Wiki Activity Actions

changed compiler to include help message only on 328pb #bugfix

Browse source
This commit is contained in:
pyr0ball 2020-01-02 15:25:30 -08:00
parent a9d928833a
commit 49bfe7663b
1 changed files with 33 additions and 30 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

61
firmware/AVR-Source/Pyr0_Piezo_Sensor_v2.x.x/src/pP_serial.h
View file

@ -16,7 +16,9 @@ void parseData() {
void identifyMarkers() {
char x = Serial.read();
// char y = Wire.read();
#ifdef I2C_INPUT
char y = Wire.read();
#endif // I2C_INPUT
if (x == '\n' || x == '\r') {
serialIncoming = true;
@ -32,25 +34,18 @@ void identifyMarkers() {
}
#ifdef I2C_INPUT
if (y == endMarker) {
readInProgress = false;
if (y == '\n' || y == '\r') {
serialIncoming = true;
inputBuffer[bytesRecvd] = 0;
parseData();
}
if (readInProgress) {
bytesRecvd = 0;
} else {
inputBuffer[bytesRecvd] = y;
bytesRecvd++;
if (bytesRecvd == buffSize) {
bytesRecvd = buffSize - 1;
}
}
if (y == startMarker) {
bytesRecvd = 0;
readInProgress = true;
}
#endif
}
@ -262,24 +257,32 @@ void updateParams() {
serialPrintState();
}
else if (strcmp(serialMessageIn, "HELP") == 0) {
// Serial.println("To change gain factor: GAIN_F [integer for gain state - see note*]");
// Serial.println("To change voltage follower voltage (low threshold): VFOL [float value]");
// Serial.println("To change comparator voltage (high threshold): VCOMP [float value]");
// Serial.println("To change main loop period: LOOP_D [integer for milliseconds]");
// Serial.println("To change trigger active duration: TRG_D [integer for milliseconds]");
// Serial.println("To change ADC hysteresis value: HYST [integer]");
// Serial.println("To enable or disable debug output: DEBUG [0|1]");
// Serial.println("To print current config: CONFIG");
// Serial.println("To set config to defaults: ERASE");
// Serial.println("To print current state: STATE");
// Serial.println("");
// Serial.println("Commands are entered in this format:");
// Serial.println("CMD VAL");
// Serial.println("Commands are confirmed with Enter key");
// Serial.println("");
// Serial.println("Examples:");
// Serial.println("GAIN_F 3 <~ set gain factor to index 3 (6x)");
// Serial.println("VFOL 2350 <~ set the vref floor to 2.35V");
#if defined(ARDUINO_AVR_ATmega328PB)
Serial.println("To change gain factor: GAIN_F [integer for gain state - see note*]");
Serial.println("To change voltage follower voltage (low threshold): VFOL [float value]");
Serial.println("To change comparator voltage (high threshold): VCOMP [float value]");
Serial.println("To change main loop period: LOOP_D [integer for milliseconds]");
Serial.println("To change trigger active duration: TRG_D [integer for milliseconds]");
Serial.println("To change the output logic: LOGIC [0|1]");
Serial.println(" (0 for active low, 1 for active high)");
Serial.println("To enable piezo plugged detection: PZDET [0|1]");
Serial.println(" (0 for disabled, 1 for enabled)");
Serial.println("To change ADC hysteresis value: HYST [integer in millivolts]");
Serial.println("To enable or disable debug output: DEBUG [0|1]");
Serial.println("To print current config: CONFIG");
Serial.println("To set config to defaults: ERASE");
Serial.println("To print current state: STATE");
Serial.println("");
Serial.println("Commands are entered in this format:");
Serial.println("CMD VAL");
Serial.println("Commands are confirmed with Enter key");
Serial.println("");
Serial.println("Examples:");
Serial.println("GAIN_F 3 <~ set gain factor to index 3 (6x)");
Serial.println("VFOL 2350 <~ set the vref floor to 2.35V");
#else
Serial.println("Check docs.pyroballpcbs.com/config")
#endif // defined(ARDUINO_AVR_ATmega328PB)
}
parseData();
}