Circuit-Forge/easypiezi
3
0
Fork 0
Code Issues 4 Pull requests Projects Releases Packages Wiki Activity Actions

fixed links and punctuation on firmware update #docs

Browse source
This commit is contained in:
pyr0ball 2020-06-10 22:58:46 -07:00
parent b58bf62e70
commit 66fbcda4fa
1 changed files with 17 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
docs/tutorials/firmware-update/beta-unit-firmware-update.md
View file

@ -20,6 +20,8 @@ Assembly animation:
<div style='position:relative; padding-bottom:calc(75.00% + 44px)'><iframe src='https://gfycat.com/ifr/AnimatedInsistentChimpanzee' frameborder='0' scrolling='no' width='100%' height='100%' style='position:absolute;top:0;left:0;' allowfullscreen></iframe></div> <div style='position:relative; padding-bottom:calc(75.00% + 44px)'><iframe src='https://gfycat.com/ifr/AnimatedInsistentChimpanzee' frameborder='0' scrolling='no' width='100%' height='100%' style='position:absolute;top:0;left:0;' allowfullscreen></iframe></div>
---
## Uploading Firmware Without a Jig ## Uploading Firmware Without a Jig
Uploading firmware without a Pyr0-Piezo AVR Programming Jig requires soldering to the test pads on the bottom of the Sensor's PCB: Uploading firmware without a Pyr0-Piezo AVR Programming Jig requires soldering to the test pads on the bottom of the Sensor's PCB:
@ -28,17 +30,21 @@ Uploading firmware without a Pyr0-Piezo AVR Programming Jig requires soldering t
To utilize the UART's in-built auto-reset function, a 10k resistor and a small capacitor must be added to the reset wire in the configuration below: To utilize the UART's in-built auto-reset function, a 10k resistor and a small capacitor must be added to the reset wire in the configuration below:
<object data="../../other/USB-UART-Wiring-Example.pdf" type="application/pdf" width="100%" height="450px"> <object data="../../../schematics/other/USB-UART-Wiring-Example.pdf" type="application/pdf" width="100%" height="450px">
<embed src="../../other/USB-UART-Wiring-Example.pdf"> <embed src="../../../schematics/other/USB-UART-Wiring-Example.pdf">
<p>This browser does not support PDFs. Please download the PDF to view it: <a href="../../other/USB-UART-Wiring-Example.pdf">Download PDF</a>.</p> <p>This browser does not support PDFs. Please download the PDF to view it: <a href="../../../schematics/other/USB-UART-Wiring-Example.pdf">Download PDF</a>.</p>
</embed> </embed>
</object> </object>
---
## Firmware Upload Procedure ## Firmware Upload Procedure
The firmware for this project can be updated using one of three methods, VS Code, Arduino IDE, or avrdude. The firmware for this project can be updated using one of three methods: VS Code, Arduino IDE, or avrdude.
Please be sure you've already [wired up your sensor's UART port](../../schematics/other/uart-programmer-wiring.md) Please be sure you've already [wired up your sensor's UART port](../../schematics/other/uart-programmer-wiring.md) or used the programmig jig described earlier in this page.
---
### VS Code (Preferred Application) ### VS Code (Preferred Application)
@ -69,12 +75,16 @@ Please be sure you've already [wired up your sensor's UART port](../../schematic
2. Click the "PlatformIO: Upload" button found in the bottom bar of the VS Code window 2. Click the "PlatformIO: Upload" button found in the bottom bar of the VS Code window
3. Verify Serial connection by opening the Serial Monitor and typing `CONFIG` or `STATE`. You should get a response. 3. Verify Serial connection by opening the Serial Monitor and typing `CONFIG` or `STATE`. You should get a response.
---
### Arduino IDE ### Arduino IDE
1. Install [Arduino IDE from Arduino's official page](https://www.arduino.cc/en/main/software) 1. Install [Arduino IDE from Arduino's official page](https://www.arduino.cc/en/main/software)
2. Under File > Preferences > Additional Board Manager URL's, Add: 2. Under File > Preferences > Additional Board Manager URL's, Add:
- `https://mcudude.github.io/MiniCore/package_MCUdude_MiniCore_index.json` - `https://mcudude.github.io/MiniCore/package_MCUdude_MiniCore_index.json`
---
### AVRDUDESS ### AVRDUDESS
#### Windows (Only) #### Windows (Only)
@ -89,6 +99,8 @@ After installing AVRDUDESS, and opening it, follow the image below with the sett
- **D.** Set the Fuse Bits to `E2`, `DF`, `F9` respectively. Leave LB *blank* - **D.** Set the Fuse Bits to `E2`, `DF`, `F9` respectively. Leave LB *blank*
- **E.** Click the Flash button to begin the upload process - **E.** Click the Flash button to begin the upload process
---
### avrdude ### avrdude
#### Windows #### Windows