Circuit-Forge/easypiezi
3
0
Fork 0
Code Issues 4 Pull requests Projects Releases Packages Wiki Activity Actions

Merge pull request #60 from klcjr89/master

Browse source 
Change in terminology for setting EEPROM to defaults within the code
This commit is contained in:
Alan Weinstock 2019-11-04 13:27:49 -08:00 committed by GitHub
commit 9ae410f011
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
4 changed files with 20 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
firmware/AVR-Source/Pyr0_Piezo_Sensor_v2.x.x/src/Pyr0_Piezo_Sensor_V2.x.x.cpp
View file

@ -45,7 +45,7 @@ You can also enable or disable DEBUG output with: DEBUG [0|1]
You can query the current configuration with: CONFIG
You can query the current state (including ADC measurements) with: STATE
To reset all settings to defaults, use: RESET
To set all settings to defaults, use: ERASE
These commands should be wrapped in this format:
CMD INT

28
firmware/AVR-Source/Pyr0_Piezo_Sensor_v2.x.x/src/pP_config.cpp
View file

@ -11,9 +11,9 @@ int Debug = 0;
long voltMeterConstant = VM_CONST_DEFAULT;
uint8_t pP_i2c_address = 0xa0;
void resetEEPROM() {
void eraseEEPROM() {
resetConfig();
setDefaultConfig();
EEPROM.put(GAIN_FACTOR_ADDRESS, GAIN_FACTOR);
EEPROM.put(FOLLOWER_THRESHOLD_ADDRESS, followerThrs);
@ -24,50 +24,50 @@ void resetEEPROM() {
EEPROM.put(VM_CONST_ADDRESS, voltMeterConstant);
}
// Restore config from EEPROM, otherwise reset config and write to EEPROM
// Restore config from EEPROM, otherwise erase config and write to EEPROM
void restoreConfig() {
int temp;
bool reset = false;
bool erase = false;
EEPROM.get(GAIN_FACTOR_ADDRESS, temp);
if (temp < 0 || temp > 4) {
reset = true;
erase = true;
} else {
GAIN_FACTOR = temp;
}
EEPROM.get(FOLLOWER_THRESHOLD_ADDRESS, temp);
if (temp < 0 || temp > 5000) {
reset = true;
erase = true;
} else {
followerThrs = temp;
}
EEPROM.get(COMP_THRESHOLD_ADDRESS, temp);
if (temp < 0 || temp > 5000) {
reset = true;
erase = true;
} else {
compThrs = temp;
}
EEPROM.get(LOOP_DUR_ADDRESS, temp);
if (temp < 0 && temp > 1000) {
reset = true;
erase = true;
} else {
LOOP_DUR = temp;
}
EEPROM.get(TRG_DUR_ADDRESS, temp);
if (temp < 0 || temp > 1000) {
reset = true;
erase = true;
} else {
TRG_DUR = temp;
}
EEPROM.get(HYST_ADDRESS, temp);
if (temp < 0 || temp > 1000) {
reset = true;
erase = true;
} else {
Hyst = temp;
}
@ -75,17 +75,17 @@ void restoreConfig() {
long longTemp;
EEPROM.get(VM_CONST_ADDRESS, longTemp);
if (longTemp < 1000000L || longTemp > 1200000L) {
reset = true;
erase = true;
} else {
voltMeterConstant = longTemp;
}
if (reset) {
resetEEPROM();
if (erase) {
eraseEEPROM();
}
}
void resetConfig() {
void setDefaultConfig() {
GAIN_FACTOR = GAIN_FACTOR_DEFAULT;
followerThrs = FOLLOWER_THRESHOLD_DEFAULT;
compThrs = COMP_THRESHOLD_DEFAULT;

4
firmware/AVR-Source/Pyr0_Piezo_Sensor_v2.x.x/src/pP_config.h
View file

@ -60,8 +60,8 @@
#endif
#endif
void resetEEPROM();
void resetConfig();
void eraseEEPROM();
void setDefaultConfig();
void restoreConfig();
#endif

6
firmware/AVR-Source/Pyr0_Piezo_Sensor_v2.x.x/src/pP_serial.h
View file

@ -222,8 +222,8 @@ void updateParams() {
else if (strcmp(serialMessageIn, "CONFIG") == 0) {
serialPrintConfig();
}
else if (strcmp(serialMessageIn, "RESET") == 0) {
resetEEPROM();
else if (strcmp(serialMessageIn, "ERASE") == 0) {
eraseEEPROM();
serialPrintConfig();
}
else if (strcmp(serialMessageIn, "STATE") == 0) {
@ -238,7 +238,7 @@ void updateParams() {
// Serial.println("To change ADC hysteresis value: HYST [integer]");
// Serial.println("To enable or disable debug output: DEBUG [0|1]");
// Serial.println("To print current config: CONFIG");
// Serial.println("To reset config to defaults: RESET");
// Serial.println("To set config to defaults: ERASE");
// Serial.println("To print current state: STATE");
// Serial.println("");
// Serial.println("Commands are entered in this format:");