Circuit-Forge/easypiezi
3
0
Fork 0
Code Issues 4 Pull requests Projects Releases Packages Wiki Activity Actions

added configs for new features logic level and pzdet #featureadd

Browse source
This commit is contained in:
pyr0ball 2020-01-20 16:20:25 -08:00
parent 6b6d13e08f
commit a4a9cb9081
1 changed files with 4 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
docs/config.md
View file

@ -18,7 +18,9 @@ To set the below parameters using serial input, use the following:
- To change trigger active duration: `TRG_D [integer for milliseconds]` - To change trigger active duration: `TRG_D [integer for milliseconds]`
- To change gain factor: `GAIN_F [integer for gain state - see note*]` - To change gain factor: `GAIN_F [integer for gain state - see note*]`
- To change ADC hysteresis value: `HYST [integer]` - To change the output logic: `LOGIC [0|1]` (0 for active low, 1 for active high)
- To enable piezo plugged detection: `PZDET [0|1]` (0 for disabled, 1 for enabled)
- To change ADC hysteresis value: `HYST [integer in millivolts]`
- To change sensor input pullup vRef low threshold: `VFOL [integer in millivolts]` - To change sensor input pullup vRef low threshold: `VFOL [integer in millivolts]`
- To change comparator trigger high threshold: `VCOMP [integer in millivolts]` - To change comparator trigger high threshold: `VCOMP [integer in millivolts]`
- To change the duration between ADC measurements: `LOOP_D [integer in milliseconds]` - To change the duration between ADC measurements: `LOOP_D [integer in milliseconds]`
@ -27,6 +29,7 @@ To set the below parameters using serial input, use the following:
You can also enable or disable DEBUG output with: `DEBUG [0|1]` You can also enable or disable DEBUG output with: `DEBUG [0|1]`
You can query the current configuration with: `CONFIG` You can query the current configuration with: `CONFIG`
You can query the current state (including ADC measurements) with: `STATE` You can query the current state (including ADC measurements) with: `STATE`
To reset all settings to defaults, use: `RESET` To reset all settings to defaults, use: `RESET`