f74b993f5c
updated eagle project file to latest
2020-10-14 14:21:30 -07:00
202a1f750c
New HW rev v2.3.2 - changes method for adjusting output voltage level #bugfix #featureadd
...
- Switches back to L78## fixed voltage regulators as they perform much better at 24v
- Changes the resistor array previously used by LM317 to adjust VCC to
now adjust output signal voltage only
- Added better thermals for VReg
- Optimized several groundplanes and polys
2020-09-28 17:40:59 -07:00
101fb49557
added additional mounting holes on EzPzEffector for accessories #featureadd
2020-09-28 16:49:52 -07:00
e5d9d9093b
Updated Orion Adapter PCB with 3-pin for PZDetect #featureadd
2020-09-15 10:49:37 -07:00
50e65db336
Added bypass jumper to allow powering EzPz direct from heater VCC #featureadd
2020-09-15 10:47:59 -07:00
bcc8653b2a
Fixed Heater trace to ground on EzPzEffector #bugfix
2020-09-14 12:51:41 -07:00
0a24160faf
Ported v2.3.x changes to FFC board #featureadd
2020-08-20 09:58:59 -07:00
da96eba542
Increased size of bypass jumper on EasyPiezi for easier soldering #bugfix
2020-08-20 09:55:56 -07:00
556371c9a8
Added board files for EzPzEffector #featureadd
2020-08-20 09:54:43 -07:00
0a10fe88d7
new board v2.3.1 - Moves larger components to top of board #bugfix
...
- also optimizes several silkscreens and trace routes
2020-07-24 13:48:52 -07:00
eaa64fa3af
fixed component values and names for v2.3.0 #bugfix
2020-07-24 13:48:17 -07:00
95ca33774f
migrated hardware files to new location
2020-05-21 11:53:59 -07:00
