Circuit-Forge/easypiezi
3
0
Fork 0
Code Issues 4 Pull requests Projects Releases Packages Wiki Activity Actions
120 commits 3 branches 18 tags 62 MiB
Commit graph

65 commits

Author SHA1 Message Date
pyr0ball
26e9a0d09c Swapped pins for 2-pin headers to match standard 2019-03-13 15:10:35 -07:00
pyr0ball
b3b5290996 Standardized naming conventions, organized 
Moved each set of board files to individual folders
 2019-03-13 14:27:43 -07:00
pyr0ball
fbb90211c5 repositioned filter cap for easier soldering 2019-03-13 12:40:03 -07:00
pyr0ball
1ad0281ee2 Swapped Atmega for ATSAMD21E family MCU 
Started work on https://github.com/pyr0ball/pyr0piezo/issues/21
Started work on https://github.com/pyr0ball/pyr0piezo/issues/22
Started pin assignments and board mapping for ARM MCU
Added i2c pins to input header
 2019-03-09 00:21:35 -08:00
pyr0ball
569439f82c Switched to 32VQFN package Atmega328pa 
Added pins to input header for I2C, removed test pads, in prep for https://github.com/pyr0ball/pyr0piezo/issues/22
Repositioned components, optimized trace routing
 2019-03-09 00:19:26 -08:00
pyr0ball
8084e65eeb Updated library and components 2019-03-09 00:17:59 -08:00
pyr0ball
afa62eca26 aligned caps for easier soldering 2019-02-26 18:52:37 -08:00
pyr0ball
b7779f0994 fixed some spacing and labelling 2019-02-26 17:14:33 -08:00
pyr0ball
3ff9d841c5 Added pdf of rev.2.0.0 schematic 2019-02-26 17:13:53 -08:00
pyr0ball
b1e8562b8d Finished first iteration of x-gantry board 
First version to address https://github.com/pyr0ball/pyr0piezo/issues/18
 2019-02-26 00:04:21 -08:00
pyr0ball
f154370089 Finished trace routing for amp diagnostics pads 2019-02-25 14:07:14 -08:00
pyr0ball
893bf50b72 Added schematic for wiring up UART for programming 
Addition to https://github.com/pyr0ball/pyr0piezo/issues/14
 2019-02-25 14:05:56 -08:00
pyr0ball
ced1d06a25 Added pin assignments for serial/i2c comms on FFC 
Builds necessary back-channel for https://github.com/pyr0ball/pyr0piezo/issues/2
Also added pin assignments used in https://github.com/pyr0ball/pyr0piezo/issues/18
 2019-02-25 09:04:19 -08:00
pyr0ball
314d840763 Started Creality X-axis extruder breakout board 
Started https://github.com/pyr0ball/pyr0piezo/issues/18
 2019-02-25 08:59:47 -08:00
pyr0ball
3695e43354 saved under Eagle v9.3.1 2019-02-25 08:57:04 -08:00
pyr0ball
56ca2af4ac Added X-motor and X-min breakouts 
Added in preparation for https://github.com/pyr0ball/pyr0piezo/issues/18
 2019-02-25 08:54:27 -08:00
pyr0ball
45777727dd Brought FFC board up to v2.x spec. 
Still ToDo: route traces for PT100 input to amp
 2019-02-24 17:06:20 -08:00
pyr0ball
d53aa7f238 Updated schematic with cleaned up and labelled circuit 2019-02-23 23:32:44 -08:00
pyr0ball
0d31025069 Added test pads for amp circuit debug 2019-02-21 02:06:32 -08:00
pyr0ball
e5806bd56f Minor adjustments to silkscreen and traces 2019-02-18 17:26:26 -08:00
pyr0ball
abd8b9830e Swapped/repositioned components 
- Swapped individual 0402 resistors for 4x array. related to https://github.com/pyr0ball/pyr0piezo/issues/16
 - repositioned LPF capacitors for easier installation. related to https://github.com/pyr0ball/pyr0piezo/issues/15
 2019-02-18 14:41:51 -08:00
pyr0ball
5bd5e5e99b Moved schematics to correct documentation folder 2019-02-18 11:00:01 -08:00
pyr0ball
c462b0a3dc Exported PDF schematics of all boards that have been fabricated 2019-02-15 12:50:41 -08:00
pyr0ball
6eb53d3039 Corrected naming convention for Standalone 1.0.2 2019-02-15 12:44:02 -08:00
pyr0ball
2226025830 Rev.2.0.0 - Rewired for full piezo circuit control 
- Moved ERR_LED to Pin2/PD4; replaced with V_FOL_PWM on Pin1/OC2B to
   adjust Voltage Follower level
 - Moved Z_Min_Trig to Pin9/PD7; replaced with VCOMP_PWM for adjusting
   comparator threshold voltage reference
 - Attached series resistor ladder to gain amp voltage divider,changed
   all resistor values to 470R, allowing a gain of 5 values: 10x, 6.8x,
   5.15x, 4.15x, and 3.47x
 - Repositioned decoupling capacitors to be more in line with the
   schematic
 2019-02-15 12:16:55 -08:00
pyr0ball
73c7b87501 fixed some spacing and labelling 2019-02-15 11:53:04 -08:00
pyr0ball
ba45f8da89 Modified footprints and added 3D Models for caps 2019-02-13 12:32:39 -08:00
pyr0ball
3c8372f490 Pushing changed files saved after exporting gerber 2019-02-13 11:18:04 -08:00
pyr0ball
070bef876b Brought FFC extruder board up to v1.1 spec 
Swapped opamps for LM2902 quad-channel
 2019-02-12 10:07:26 -08:00
pyr0ball
a695c8e069 Gave some extra space to zener diode 
related to https://github.com/pyr0ball/pyr0piezo/issues/12
 2019-02-11 15:54:00 -08:00
pyr0ball
118e8cf7e0 Added v2.0.0 Extruder board, rewire for 60p 
This is a first draft of the new rewiring scheme
Moving from 1mm pitch 26pin to 0.5mm pitch 60pin
for greater number of signals. Should allow for
the new planned features.
 2019-02-11 13:54:23 -08:00
pyr0ball
bc0ab92672 Prepare for major rewire (26p -> 60p) 2019-02-10 00:50:00 -08:00
pyr0ball
b1f61fc386 Reduced FFC breakout overall size, begin rewire 2019-02-10 00:47:44 -08:00
pyr0ball
cd5d5328b1 Removed VCC_Reg output smoothing transistor 2019-02-10 00:44:24 -08:00
pyr0ball
2d7a85786b Fixed spacing for zener diode 2019-02-10 00:42:46 -08:00
pyr0ball
141e0c62e8 Adjusted spacing on traces/components 2019-02-10 00:41:52 -08:00
pyr0ball
5ad9075561 Fixed airwires and overlaps 2019-02-08 03:35:03 -08:00
pyr0ball
45bbd4eba0 Added labels to controller connector 2019-02-08 03:25:14 -08:00
pyr0ball
76f6987b55 Added version with PT100 amp integrated 
- utilizes the 4th unused channel on LM2902
 - added additional conductor on controller connector
 - fixed passive label locations
 2019-02-08 03:00:26 -08:00
pyr0ball
0b4e0d56df fixed footprint for LM2902, optimized traces 2019-02-08 02:58:19 -08:00
pyr0ball
fcb41c6ceb Optimized trace layout, serpentined usb 2019-02-08 02:57:05 -08:00
pyr0ball
76b4ba6de8 Added missing 0.1uF cap on AVR Vcc 2019-02-07 14:36:06 -08:00
pyr0ball
d51cad7c9f v1.1 Piezo Standalone board 
- Added overvolt/overcurrent protection
via zener diode and fuse
 - Swapped LM358 dual channel opamp + MCP6001 Single Channel opamp for LM2902 Quad Channel.
 - Added jumper to bypass Vreg for < 6V input
 2019-02-07 14:23:59 -08:00
pyr0ball
8aeef551a6 moved usb to bottom of board, fixed caps 
Decoupling capacitors were connected on
the wrong voltage regulation input
 2019-02-07 14:22:30 -08:00
pyr0ball
c4338f7434 updated with minor fixes to text placement 2019-02-04 14:25:06 -08:00
pyr0ball
e1ac334c84 added ICSP header for standalone units 2019-02-04 14:19:18 -08:00
pyr0ball
5dadfdec3a re-adding AVR programmer after fixing conflict 2019-01-31 13:53:09 -08:00
pyr0ball
95230a3df3 Merge branch 'master' of https://github.com/pyr0ball/pyr0piezo 2019-01-31 13:51:37 -08:00
pyr0ball
60b4da727f Fixed airwires and overlaps caused by swapping IC 
Reminder to always do a DRC after changin BOM!
 2019-01-31 13:06:49 -08:00
pyr0ball
ab13935934 Replaced opamps with single quad-channel 
Replacement has better specs and is not backordered. BOM price is also a
bit better.
 2019-01-26 01:42:48 -08:00