# Railcore II Under-Bed Integration

The Railcore has a print bed mounting system that is ideal for placing a piezo pickup between the yoke and the bed itself. This integration requires 3x piezo elements wired in parallel.

![Railcore Integration Side View](https://pyroballpcbs.com/wp-content/uploads/2020/07/RailCore_II_300ZL_Side.png)

![Railcore Integration Overhead View](https://pyroballpcbs.com/wp-content/uploads/2020/07/RailCore_II_300ZL_overhead.png)

![Railcore Integration Bed Off](https://pyroballpcbs.com/wp-content/uploads/2020/07/RailCore_II_300ZL_bed-off-1.png)

![Railcore Integration Close Up](https://pyroballpcbs.com/wp-content/uploads/2020/07/RailCore_II_300ZL_close-up.png)

Parts required:

- 1x EasyPiezi Module
- 3x pP SingleDisk Adapter
- 1x pP Delta Wiring Harness (or DIY spliced wires)
- 3x 1/8th in. ID, 3/16th Height Rubber Grommet
- 2x M3 4mm Bolt
- Printed parts below:

[Z-Yoke with SingleDisk Adapter Mount (Print two normal, one Mirrored)](https://a360.co/39bEYqz)

<iframe src="https://myhub.autodesk360.com/ue2a1207a/shares/public/SH56a43QTfd62c1cd968948948e61efc573f?mode=embed" width="800" height="600" allowfullscreen="true" webkitallowfullscreen="true" mozallowfullscreen="true"  frameborder="0"></iframe>

[Piezo Actuator (Print three)](https://a360.co/3jONl0U)

<iframe src="https://myhub.autodesk360.com/ue2a1207a/shares/public/SH56a43QTfd62c1cd9684aaf989e53438af7?mode=embed" width="800" height="600" allowfullscreen="true" webkitallowfullscreen="true" mozallowfullscreen="true"  frameborder="0"></iframe>