diff --git a/hardware/.gitkeep b/hardware/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/bom/.gitkeep b/hardware/bom/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/bom/merlin-bci-rev0.csv b/hardware/bom/merlin-bci-rev0.csv
new file mode 100644
index 0000000..af5ff4f
--- /dev/null
+++ b/hardware/bom/merlin-bci-rev0.csv
@@ -0,0 +1,126 @@
+RefDes,Qty,Value / MPN,Package,Description,Notes
+U1,1,ADS1299IPAGR,TQFP-64,8-ch 24-bit delta-sigma EEG/ECG ADC,"TI; DVDD 1.8–3.6V, AVDD ±(2.5–5.25V)"
+U2,1,ESP32-WROOM-32E (4MB),SMD module (18×25.5mm),"Dual-core 240MHz, WiFi+BT MCU","brainflow CUSTOM_BOARD via WiFi; or use devkit during firmware dev"
+U3,1,MGJ2D121505SC,12-SMD SIP,"Isolated DC/DC 5V in → ±5V out, 2W","Murata; patient isolation barrier for AVDD/AVSS supply"
+U4,1,REF3325AIDBZR,SOT-23-5,"2.5V precision ref/LDO, 50ppm/°C","TI; AVDD rail (patient side)"
+U5,1,TPS60403DBVR,SOT-23-5,"Inverting charge pump −2.5V (AVSS)","TI; no inductor; in from isolated +5V"
+U6,1,TLV1117-33DCYR,SOT-223,"3.3V 800mA LDO for DVDD + MCU","Input from isolated +5V rail"
+Y1,1,2.048MHz ±50ppm,3225 4-pad SMD,"Crystal for ADS1299 CLK","Ties to CLK pin; CLKSEL → DVDD"
+C_CLK1,1,12pF C0G 0402,0402,Crystal load cap X1,Match to crystal spec (typically 8–18pF)
+C_CLK2,1,12pF C0G 0402,0402,Crystal load cap X2,
+R_IN1,1,10kΩ 1% 0402,0402,IN1P input series protection,
+R_IN2,1,10kΩ 1% 0402,0402,IN1N input series protection,
+R_IN3,1,10kΩ 1% 0402,0402,IN2P input series protection,
+R_IN4,1,10kΩ 1% 0402,0402,IN2N input series protection,
+R_IN5,1,10kΩ 1% 0402,0402,IN3P input series protection,
+R_IN6,1,10kΩ 1% 0402,0402,IN3N input series protection,
+R_IN7,1,10kΩ 1% 0402,0402,IN4P input series protection,
+R_IN8,1,10kΩ 1% 0402,0402,IN4N input series protection,
+R_IN9,1,10kΩ 1% 0402,0402,IN5P input series protection,
+R_IN10,1,10kΩ 1% 0402,0402,IN5N input series protection,
+R_IN11,1,10kΩ 1% 0402,0402,IN6P input series protection,
+R_IN12,1,10kΩ 1% 0402,0402,IN6N input series protection,
+R_IN13,1,10kΩ 1% 0402,0402,IN7P input series protection,
+R_IN14,1,10kΩ 1% 0402,0402,IN7N input series protection,
+R_IN15,1,10kΩ 1% 0402,0402,IN8P input series protection,
+R_IN16,1,10kΩ 1% 0402,0402,IN8N input series protection,
+C_AC1,1,10µF X5R 0402,0402,"AC coupling / HPF ch1P (fc ≈ 1.6Hz @ 10kΩ)","Between R_IN and ADS1299 pin"
+C_AC2,1,10µF X5R 0402,0402,AC coupling / HPF ch1N,
+C_AC3,1,10µF X5R 0402,0402,AC coupling / HPF ch2P,
+C_AC4,1,10µF X5R 0402,0402,AC coupling / HPF ch2N,
+C_AC5,1,10µF X5R 0402,0402,AC coupling / HPF ch3P,
+C_AC6,1,10µF X5R 0402,0402,AC coupling / HPF ch3N,
+C_AC7,1,10µF X5R 0402,0402,AC coupling / HPF ch4P,
+C_AC8,1,10µF X5R 0402,0402,AC coupling / HPF ch4N,
+C_AC9,1,10µF X5R 0402,0402,AC coupling / HPF ch5P,
+C_AC10,1,10µF X5R 0402,0402,AC coupling / HPF ch5N,
+C_AC11,1,10µF X5R 0402,0402,AC coupling / HPF ch6P,
+C_AC12,1,10µF X5R 0402,0402,AC coupling / HPF ch6N,
+C_AC13,1,10µF X5R 0402,0402,AC coupling / HPF ch7P,
+C_AC14,1,10µF X5R 0402,0402,AC coupling / HPF ch7N,
+C_AC15,1,10µF X5R 0402,0402,AC coupling / HPF ch8P,
+C_AC16,1,10µF X5R 0402,0402,AC coupling / HPF ch8N,
+C_EMI1,1,4.7nF C0G 0402,0402,EMI shunt ch1P to AGND,
+C_EMI2,1,4.7nF C0G 0402,0402,EMI shunt ch1N to AGND,
+C_EMI3,1,4.7nF C0G 0402,0402,EMI shunt ch2P to AGND,
+C_EMI4,1,4.7nF C0G 0402,0402,EMI shunt ch2N to AGND,
+C_EMI5,1,4.7nF C0G 0402,0402,EMI shunt ch3P to AGND,
+C_EMI6,1,4.7nF C0G 0402,0402,EMI shunt ch3N to AGND,
+C_EMI7,1,4.7nF C0G 0402,0402,EMI shunt ch4P to AGND,
+C_EMI8,1,4.7nF C0G 0402,0402,EMI shunt ch4N to AGND,
+C_EMI9,1,4.7nF C0G 0402,0402,EMI shunt ch5P to AGND,
+C_EMI10,1,4.7nF C0G 0402,0402,EMI shunt ch5N to AGND,
+C_EMI11,1,4.7nF C0G 0402,0402,EMI shunt ch6P to AGND,
+C_EMI12,1,4.7nF C0G 0402,0402,EMI shunt ch6N to AGND,
+C_EMI13,1,4.7nF C0G 0402,0402,EMI shunt ch7P to AGND,
+C_EMI14,1,4.7nF C0G 0402,0402,EMI shunt ch7N to AGND,
+C_EMI15,1,4.7nF C0G 0402,0402,EMI shunt ch8P to AGND,
+C_EMI16,1,4.7nF C0G 0402,0402,EMI shunt ch8N to AGND,
+D1,1,BAV99,SOT-23,"Dual Schottky clamp ch1 (INP+INN to AVDD/AVSS)","1 BAV99 = 2 diodes; clamp one diff pair"
+D2,1,BAV99,SOT-23,Dual Schottky clamp ch2,
+D3,1,BAV99,SOT-23,Dual Schottky clamp ch3,
+D4,1,BAV99,SOT-23,Dual Schottky clamp ch4,
+D5,1,BAV99,SOT-23,Dual Schottky clamp ch5,
+D6,1,BAV99,SOT-23,Dual Schottky clamp ch6,
+D7,1,BAV99,SOT-23,Dual Schottky clamp ch7,
+D8,1,BAV99,SOT-23,Dual Schottky clamp ch8,
+R_BIAS1,1,820kΩ 1% 0402,0402,Input bias ch1P (BIASIN network to BIASOUT),
+R_BIAS2,1,820kΩ 1% 0402,0402,Input bias ch1N,
+R_BIAS3,1,820kΩ 1% 0402,0402,Input bias ch2P,
+R_BIAS4,1,820kΩ 1% 0402,0402,Input bias ch2N,
+R_BIAS5,1,820kΩ 1% 0402,0402,Input bias ch3P,
+R_BIAS6,1,820kΩ 1% 0402,0402,Input bias ch3N,
+R_BIAS7,1,820kΩ 1% 0402,0402,Input bias ch4P,
+R_BIAS8,1,820kΩ 1% 0402,0402,Input bias ch4N,
+R_BIAS9,1,820kΩ 1% 0402,0402,Input bias ch5P,
+R_BIAS10,1,820kΩ 1% 0402,0402,Input bias ch5N,
+R_BIAS11,1,820kΩ 1% 0402,0402,Input bias ch6P,
+R_BIAS12,1,820kΩ 1% 0402,0402,Input bias ch6N,
+R_BIAS13,1,820kΩ 1% 0402,0402,Input bias ch7P,
+R_BIAS14,1,820kΩ 1% 0402,0402,Input bias ch7N,
+R_BIAS15,1,820kΩ 1% 0402,0402,Input bias ch8P,
+R_BIAS16,1,820kΩ 1% 0402,0402,Input bias ch8N,
+R_DRL1,1,1MΩ 1% 0402,0402,DRL feedback resistor (RLDFB),
+R_DRL2,1,680Ω 1% 0402,0402,DRL output protection,
+C_DRL1,1,4.7nF C0G 0402,0402,DRL loop stability capacitor,In parallel with R_DRL1
+C_VREFP1,1,10µF X5R 6.3V 0805,0805,VREFP bulk bypass,
+C_VREFP2,1,100nF C0G 0402,0402,VREFP HF bypass,
+C_AVDD1,1,10µF X5R 10V 0805,0805,AVDD bulk bypass #1,
+C_AVDD2,1,10µF X5R 10V 0805,0805,AVDD bulk bypass #2,
+C_AVDD3,1,100nF C0G 0402,0402,AVDD HF bypass #1,
+C_AVDD4,1,100nF C0G 0402,0402,AVDD HF bypass #2,
+C_AVDD5,1,100nF C0G 0402,0402,AVDD HF bypass #3,
+C_AVSS1,1,10µF X5R 10V 0805,0805,AVSS bulk bypass #1 (to AGND),
+C_AVSS2,1,10µF X5R 10V 0805,0805,AVSS bulk bypass #2,
+C_AVSS3,1,100nF C0G 0402,0402,AVSS HF bypass #1,
+C_AVSS4,1,100nF C0G 0402,0402,AVSS HF bypass #2,
+C_AVSS5,1,100nF C0G 0402,0402,AVSS HF bypass #3,
+C_DVDD1,1,100nF C0G 0402,0402,DVDD bypass pin 1,
+C_DVDD2,1,100nF C0G 0402,0402,DVDD bypass pin 2,
+C_DVDD3,1,100nF C0G 0402,0402,DVDD bypass pin 3,
+C_DVDD4,1,10µF X5R 0805,0805,DVDD bulk bypass,
+R_SPI1,1,33Ω 0402,0402,SPI MOSI series termination,MCU side of trace
+R_SPI2,1,33Ω 0402,0402,SPI MISO series termination,
+R_SPI3,1,33Ω 0402,0402,SPI SCLK series termination,
+R_SPI4,1,33Ω 0402,0402,SPI CS series termination,
+R_DRDY,1,1kΩ 0402,0402,DRDY pull-up to DVDD,
+C_DRDY,1,100pF C0G 0402,0402,DRDY glitch filter,
+R_PU1,1,10kΩ 0402,0402,RESET pull-up to DVDD,
+R_PU2,1,10kΩ 0402,0402,START pull-up to DVDD,
+R_PU3,1,10kΩ 0402,0402,PWDN pull-up to DVDD,
+R_PU4,1,10kΩ 0402,0402,CLKSEL tie to DVDD (ext crystal mode),"Can use 0Ω; 10kΩ keeps GPIO optional"
+C_MCU1,1,100nF X5R 0402,0402,ESP32 VDDA bypass,
+C_MCU2,1,100nF X5R 0402,0402,ESP32 3V3 bypass #1,
+C_MCU3,1,100nF X5R 0402,0402,ESP32 3V3 bypass #2,
+C_MCU4,1,100nF X5R 0402,0402,ESP32 3V3 bypass #3,
+C_MCU5,1,10µF X5R 0805,0805,ESP32 3V3 bulk bypass,
+C_ISO1,1,10µF X5R 10V 0805,0805,Isolated +5V rail bulk cap,After MGJ2D121505SC output
+C_ISO2,1,100nF C0G 0402,0402,Isolated +5V HF bypass,
+C_ISO3,1,10µF X5R 10V 0805,0805,Isolated −5V rail bulk cap,
+C_ISO4,1,100nF C0G 0402,0402,Isolated −5V HF bypass,
+J1,1,USB4085-GF-A,USB-C mid-mount SMD,USB-C connector to host,"GCT; data carried wirelessly (WiFi); USB only for firmware flash"
+J2,1,3.5mm TRRS × 9,TH or panel mount,"Electrode jacks: 8 channels + DRL ref","Or Touchproof Ag/AgCl snap connector header"
+J3,1,2×5 2.54mm header,TH,SWD/JTAG debug header for ESP32,Optional
+J4,1,2×2 2.54mm header,TH,BOOT / EN jumpers for ESP32 flash mode,
+FB1,1,600Ω @ 100MHz 0805,0805,Ferrite bead on DVDD supply,Isolate digital noise from analog rails
+FB2,1,600Ω @ 100MHz 0805,0805,Ferrite bead on AGND bridge to DGND,Star-ground point; single-point bond
diff --git a/hardware/cad/.gitkeep b/hardware/cad/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cad/2d/.gitkeep b/hardware/cad/2d/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cad/3d/.gitkeep b/hardware/cad/3d/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cad/pcb/.gitkeep b/hardware/cad/pcb/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cad/schematic/.gitkeep b/hardware/cad/schematic/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cam/.gitkeep b/hardware/cam/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cam/drill/.gitkeep b/hardware/cam/drill/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cam/gerbers/.gitkeep b/hardware/cam/gerbers/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/cam/pick-and-place/.gitkeep b/hardware/cam/pick-and-place/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/docs/.gitkeep b/hardware/docs/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/parts/.gitkeep b/hardware/parts/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/parts/datasheets/.gitkeep b/hardware/parts/datasheets/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/parts/footprints/.gitkeep b/hardware/parts/footprints/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/parts/symbols/.gitkeep b/hardware/parts/symbols/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/hardware/sim/.gitkeep b/hardware/sim/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/merlin/actions/executor.py b/merlin/actions/executor.py
index edf23d7..e43811b 100644
--- a/merlin/actions/executor.py
+++ b/merlin/actions/executor.py
@@ -32,6 +32,8 @@ _XDOTOOL_CLICK: dict[str, list[str]] = {
     "middle_click": ["xdotool", "click", "2"],
     "scroll_up": ["xdotool", "click", "4"],
     "scroll_down": ["xdotool", "click", "5"],
+    "scroll_left": ["xdotool", "click", "6"],
+    "scroll_right": ["xdotool", "click", "7"],
 }
 
 _XDOTOOL_KEY: dict[str, str] = {
@@ -39,6 +41,9 @@ _XDOTOOL_KEY: dict[str, str] = {
     "key_escape": "Escape",
     "key_space": "space",
     "key_tab": "Tab",
+    "key_ctrl_z": "ctrl+z",
+    "key_ctrl_c": "ctrl+c",
+    "key_ctrl_v": "ctrl+v",
 }
 
 
@@ -51,6 +56,10 @@ class ActionExecutor:
         else:
             self._backend = backend
 
+    @property
+    def backend(self) -> Backend:
+        return self._backend
+
     def execute(self, action: str) -> None:
         """Execute a named action. Silently ignores unknown action names."""
         try:
@@ -86,11 +95,21 @@ class ActionExecutor:
             pyautogui.scroll(3)
         elif action == "scroll_down":
             pyautogui.scroll(-3)
+        elif action == "scroll_left":
+            pyautogui.hscroll(-3)
+        elif action == "scroll_right":
+            pyautogui.hscroll(3)
         elif action == "key_enter":
             pyautogui.press("enter")
         elif action == "key_escape":
             pyautogui.press("escape")
         elif action == "key_space":
             pyautogui.press("space")
+        elif action == "key_ctrl_z":
+            pyautogui.hotkey("ctrl", "z")
+        elif action == "key_ctrl_c":
+            pyautogui.hotkey("ctrl", "c")
+        elif action == "key_ctrl_v":
+            pyautogui.hotkey("ctrl", "v")
         else:
             logger.warning("pyautogui: unknown action %r", action)
diff --git a/merlin/config.py b/merlin/config.py
index 3994f51..a19c5be 100644
--- a/merlin/config.py
+++ b/merlin/config.py
@@ -25,6 +25,11 @@ DEFAULT_MAPPINGS: dict[str, str] = {
     "head_tilt_right": "scroll_down",
     "open_palm": "key_space",
     "pinch": "drag_start",
+    "fist": "key_ctrl_z",
+    "gaze_left": "scroll_left",
+    "gaze_right": "scroll_right",
+    "gaze_up": "scroll_up",
+    "gaze_down": "scroll_down",
 }
 
 
diff --git a/merlin/daemon.py b/merlin/daemon.py
index b1c9d81..fc112b6 100644
--- a/merlin/daemon.py
+++ b/merlin/daemon.py
@@ -82,6 +82,12 @@ def _camera_loop() -> None:
                         if action:
                             _executor.execute(action)
 
+                    gaze = gaze_est.estimate(face)
+                    if gaze.label != "center":
+                        action = _mapper.map(f"gaze_{gaze.label}")
+                        if action:
+                            _executor.execute(action)
+
                 hands = hands_det.detect(rgb)
                 if hands:
                     gesture = hand_det.detect(hands[0].points)
@@ -119,7 +125,7 @@ app.add_middleware(
 def status() -> dict[str, Any]:
     return {
         "running": _running,
-        "backend": _executor._backend,
+        "backend": _executor.backend,
         "config": {
             "camera_device": _config.camera_device,
             "blink_threshold": _config.blink_threshold,