Integration using I2C

Default I2C Address: 0x10

I2C Command Register Map

see Pyr0-Piezo Parameters Explanation for more specific details on the command aliases.

I2C Register	Command Alias	Arguments	Type	Bytes Length
0x00	GAIN_F	Gain Factor	Input	2
0x01	VFOL	Millivolts	Input	2
0x02	VCOMP	Millivolts	Input	2
0x03	LOOP_D	Milliseconds	Input	2
0x04	TRG_D	Milliseconds	Input	2
0x05	HYST	Millivolts	Input	2
0x06	LOGIC	Boolean	Input	2
0x07	PZDET	Boolean	Input	2
0x08	CONST	Millivolts	Input	4
0x09	CONFIG	None	Output	32
0x0a	ERASE	None	Input	1
0x0b	STATE	None	Output	10
0x0c	VCCSW	Boolean	Input	1
0x0d	VCCADJUST	Millivolts	Input	2

I2C input syntax uses "Least Significant Byte First" formatting, which means the data bytes are sent in reverse order:

[Address Byte] [Command Byte] [Data 8] ... [Data 0]

For example, to set the Logic output to Active Low:

0x10 0x06 0x00

Or to set VCOMP to 2650:

0x10 0x02 0x5A 0x0A