easypiezi/docs/changelog.md

Pyr0-Piezo Changelog

551fcb7 to cfa0abc

Changelog updated 2019-08-15_15-31-12

Added Features

---

Bugfixes

---

Full Changelog

• Initial upload of arduino sketch for the atmega48 view commit

• added gitignore view commit

• Added eagle board files view commit

• added mask for temporary eagle files view commit

• Initial upload of 3D models view commit

• Updated Readme with links view commit

• Removed debug serial output, fixed voltage reference divisor view commit

• Merge branch 'master' of https://github.com/pyr0ball/pyr0piezo view commit

• Fixed syntax error in voltage adjustment function view commit

• Fixed syntax error in Error State function view commit

• Reduced default loop time, syntax errors were resolved view commit

• Added comments for PCInt vs Int pin usage view commit

• Moved test points for spi to ICSP standard header view commit

• Added bom files for each board view commit

• Adjusted placement of text view commit

• Fixed accidental short of pin to ground view commit

• Adjusted trace placement, added logo to bottom of board view commit

• Updated standalone board with final piezo circuit view commit

• Created separate sketch for smaller flash view commit

• Begin refactor of sketch for smaller flash footprint view commit

• Added description to Eagle project folder view commit

• Reorganized 3D models view commit

• updated readme view commit

• Update Readme view commit

cfa0abc to 76b4ba6

Changelog updated 2019-08-15_15-32-15

Added Features

---

Bugfixes

---

Full Changelog

• fixed trace accidentally connected to ground view commit

• Renamed boards, Fixed programmer view commit

• Pulling latest before pushing changes. view commit

• Rebuilt and corrected mount hole spacing view commit

• Created mounts for stock Creality/Tevo/TronXY extruders view commit

• Created tolerance cavities for inserting bearings view commit

• Added tolerance for knurled nut insert view commit

• Added cutout for slide-on nozzle mount to be easily added view commit

• Added ICSP Header/breakout to programmer view commit

• Added simple overvoltage protection to standalone view commit

• Added alternate TVS diode view commit

• Fixing Merge conflicts view commit

• re-adding files after fix-merge view commit

• Replaced opamps with single quad-channel view commit

• removed copypasta link view commit

• Fixed airwires and overlaps caused by swapping IC view commit

• Merge branch 'master' of https://github.com/pyr0ball/pyr0piezo view commit

• re-adding AVR programmer after fixing conflict view commit

• Rotated parts to proper printing orientation view commit

• added ICSP header for standalone units view commit

• updated with minor fixes to text placement view commit

• fixed missing ziptie channels on prusa mount view commit

• Added sources folder for 3D Models view commit

• Added info to readme view commit

• Update README.md view commit

• moved usb to bottom of board, fixed caps view commit

• v1.1 Piezo Standalone board view commit

• Added missing 0.1uF cap on AVR Vcc view commit

76b4ba6 to v2.0.0

Changelog updated 2019-08-15_15-49-28

Added Features

---

Bugfixes

---

Full Changelog

• Optimized trace layout, serpentined usb view commit

• fixed footprint for LM2902, optimized traces view commit

• Added version with PT100 amp integrated view commit

• Added labels to controller connector view commit

• Fixed airwires and overlaps view commit

• Adjusted spacing on traces/components view commit

• Fixed spacing for zener diode view commit

• Removed VCC_Reg output smoothing transistor view commit

• Added Fusion source files for Creality OEM mount view commit

• Reduced FFC breakout overall size, begin rewire view commit

• Prepare for major rewire (26p -> 60p) view commit

• Added support channels for upper bearings view commit

• Added folder structure for firmware source view commit

• Added discord server link view commit

• Added v2.0.0 Extruder board, rewire for 60p view commit

• Gave some extra space to zener diode view commit

• Added drawing for Standalone board component layout view commit

• Brought FFC extruder board up to v1.1 spec view commit

• Pushing changed files saved after exporting gerber view commit

• Modified footprints and added 3D Models for caps view commit

• Added pinout/hookup drawings view commit

• Added drawings and docs for Extruder FFC v1.1.0 view commit

• Added firmware hex file used in alpha boards view commit

• fixed some spacing and labelling view commit

• Rev.2.0.0 - Rewired for full piezo circuit control view commit

• Corrected naming convention for Standalone 1.0.2 view commit

• Exported PDF schematics of all boards that have been fabricated view commit

• Moved schematics to correct documentation folder view commit

• Added guide for configuring Marlin on rev.1.x.x view commit

• Swapped/repositioned components view commit

• Minor adjustments to silkscreen and traces view commit

• Fixed https://github.com/pyr0ball/pyr0piezo/issues/17 view commit

• First draft of firmware v2.0.0 view commit

• Added basic serial input to modify parameters view commit

• Added the serial input function to the loop view commit

• fixed pin assignment from debug edit view commit

• Added test pads for amp circuit debug view commit

• compiled 1.0.2 firmware with fixed output pins view commit

• Updated schematic with cleaned up and labelled circuit view commit

• Brought FFC board up to v2.x spec. view commit

• Removed cavity behind bearings causing binding view commit

• Added X-motor and X-min breakouts view commit

• saved under Eagle v9.3.1 view commit

• Started Creality X-axis extruder breakout board view commit

• Added pin assignments for serial/i2c comms on FFC view commit

• removed unused firmware, renamed existing to follow nomenclature view commit

• Added component layout docs for rev.2.0.0 view commit

• Added schematic for wiring up UART for programming view commit

• Finished trace routing for amp diagnostics pads view commit

v2.0.0 to v2.0.1

Changelog updated 2019-08-15_15-50-29

Added Features

---

Bugfixes

---

Full Changelog

• added ignore for openoffice text temp files view commit

• Added Pyr0-Piezo firmware update docs view commit

• renamed firmware update docs view commit

• Finished first iteration of x-gantry board view commit

• Added pdf of rev.2.0.0 schematic view commit

• fixed some spacing and labelling view commit

• renamed latest v2.0.0 pdf view commit

• aligned caps for easier soldering view commit

• Fixed PWM output syntax view commit

• Renamed Rev.1.x.x sketch to match folder view commit

• Updated library and components view commit

v2.0.1 to v2.0.1_hw

Changelog updated 2019-08-15_15-50-42

Added Features

---

Bugfixes

---

Full Changelog

• Switched to 32VQFN package Atmega328pa view commit

• Swapped Atmega for ATSAMD21E family MCU view commit

• added folder for wiki files, uploaded logo view commit

• repositioned filter cap for easier soldering view commit

• Standardized naming conventions, organized view commit

• Swapped pins for 2-pin headers to match standard view commit

• Replaced serial parser, verified parameters update view commit

• Added rudimentary i2c listener, fixed loop view commit

• fixed syntax preventing compilation view commit

• Added wiring diagrams, fixed docs view commit

• Added wiring diagram for DuetWifi view commit

• Added hookup guides for common MKS boards view commit

• Updated description. Sync files view commit

• Begin sync of Rev.2.0.1 changes view commit

• rotated fuse for easier soldering view commit

• sync all boards for Rev.2.0.1 before gerberization view commit

v2.0.1_hw to v2.0.2

Changelog updated 2019-08-15_15-50-56

Added Features

---

Bugfixes

---

Full Changelog

• fixed syntax preventing compilation view commit

• Added wiring diagrams, fixed docs view commit

• Added wiring diagram for DuetWifi view commit

• Added hookup guides for common MKS boards view commit

• Updated description. Sync files view commit

• Begin sync of Rev.2.0.1 changes view commit

• rotated fuse for easier soldering view commit

• sync all boards for Rev.2.0.1 before gerberization view commit

v2.0.2 to v2.1.1

Changelog updated 2019-08-15_15-51-05

Added Features

---

Bugfixes

---

Full Changelog

• fixed syntax preventing compilation view commit

• Added wiring diagrams, fixed docs view commit

• Added wiring diagram for DuetWifi view commit

• Added hookup guides for common MKS boards view commit

• Updated description. Sync files view commit

• Begin sync of Rev.2.0.1 changes view commit

• rotated fuse for easier soldering view commit

• sync all boards for Rev.2.0.1 before gerberization view commit

• updated discord link view commit

• Added ESD protection diodes to motor connections view commit

• Brought library additions to older rev boards view commit

• Renamed X-car breakout for direct feed. view commit

• Merge readme before push view commit

• Beta production board sync view commit

• Replaced license with CC-BY-SA-4.0 view commit

• Updated eagle files for 1.0.2 for Eagle 9.0.2 view commit

• Updated link to license view commit

• Adjusted capacitor placement for easier soldering view commit

• fixed unary operators for adjustment logic view commit

• migrated floats to #define values view commit

• Converting to defines and else ifs view commit

• Fixing debug vars in case they ever want to be used again view commit

• Fixes for oscillating PWM output view commit

• Merge branch 'master' into MinorOptimizations view commit

• Merge pull request #25 from foodbandlt/MinorOptimizations view commit

• Added function to alert the user when calibrating view commit

• Set I2C input to be toggled by def view commit

• for v2.x this fixes https://github.com/pyr0ball/pyr0piezo/issues/28 view commit

• Separated functions and definitions view commit

• fixed names for new files view commit

• changed adc calculations to use Vin reference view commit

• fixed some ordering causing definition issues view commit

v2.1.1 to v2.1.2

Changelog updated 2019-08-15_15-51-13

Added Features

---

Bugfixes

---

Full Changelog

• Fixed "Flappy DAC" bug in rev.2.x.x firmware view commit

• removed last remaining float, cleaned up unused vars view commit

• Added mkdocs for readthedocs integration view commit

• started adding structure to the site view commit

• switched to faster digitalWrite function for interrupt function view commit

• added document structure, site output to gitignore view commit

• Merge branch 'master' of https://github.com/pyr0ball/pyr0piezo view commit

• Added a few FAQ's view commit

• Switched to task scheduler library for faster interrupt processing view commit

• Created variable for voltmeter constant, fixed whitespace a bit view commit

• Complete overhaul of i2c code, created library structure view commit

• Changed compiler structure for including I2C view commit

• Added i2c input handler for long variable view commit

• Migrated configs to separate header file, made adjustment to definition view commit

• Changed compiler behavior for i2c. I2C library is still broken view commit

v2.1.2 to v2.1.2_docs

Changelog updated 2019-08-15_16-07-36

Added Features

• setting up syntax for changelogs on the docs site #featureadd view commit

• Added comprehensive changelog generated from script #featureadd view commit

---

Bugfixes

• fixed syntax for table of contents on changelog #bugfix view commit

• added additional separator between sections added by changelog script #bugfix view commit

---

Full Changelog

• Migrated from single 60pin FFC to combined 15+40p view commit

• Pushing 2.0.2 revised board files before 2.1.1 view commit

• Moved to dual FFC cable (15p-1MM + 40p-0.5mm) view commit

• renamed wiki folder to assets view commit

• Added installation instructions (barely) view commit

• Merge branch 'master' of https://github.com/pyr0ball/pyr0piezo view commit

• Added issue template for requesting a new mount view commit

• Added issue template to docs view commit

• Adding install docs filestructure view commit

• added a few other kinematics to the install structure view commit

• added menu structure and placeholder for hictop i3 view commit

• fixed menu structure for mkdocs view commit

• fixed typo with link for hictop i3 view commit

• fixed issue with markdown nested bullets on install page view commit

• added images for instructions for mp-delta-mini view commit

• added another pic for mp-delta-mini view commit

• renamed ultimaker to "quadrap" to better reflect nomenclature view commit

• renamed ultimaker to quadrap in main menu view commit

• Started on documentation for the Monoprice Delta Mini view commit

• fixed links in installation.md view commit

• fixed referential links in mp-delta-mini view commit

• Added instructions for monoprice-delta-mini view commit

• added a link to MPDM's unofficial wiki view commit

• renamed folders view commit

• switched to material design theme for documentation site view commit

• Added Printer firmware configuration for Marlin view commit

• fixed links and header formatting view commit

• added script for generating changelog from commits view commit

• added favicon view commit

• fixed typo in menu view commit

• added png favicon view commit

• added info to the changelog script view commit

• added extra functions to changelog script, added mkdocs deploy view commit

• updated readme and about view commit

• attempting to override site logo view commit

• fixed override syntax view commit

• new try view commit

• fixing logo view commit

• Fixing favicon and site logo view commit

• fixing nested list spacing view commit

• resize header logo view commit

• Added wiring diagram for Creality boards view commit

• removed unneeded link view commit

• added wiring diagrams view commit

• Set theme jekyll-theme-hacker view commit

• Update issue templates view commit

• added links to schematics in main menu view commit

• added links for drawings view commit

• rearranged files, added test pads layout view commit

• renamed drawing and schematics folders view commit

• fixed typo in link view commit

• fixed issue with pdf location view commit

• fixed embedded pdf layout size view commit

• added embedded content for easypiezi pinouts view commit

• fixed syntax view commit

• migrating more pages to embedded pdf view commit

• added embedded content to layouts section view commit

• moved wiring diagrams section to installation view commit

• fixed some file encoding issues view commit

• Fixed syntax issue with changelog script view commit

• setting up syntax for changelogs on the docs site #featureadd view commit

• fixed some syntax with regex for the changelog view commit

• Added comprehensive changelog generated from script #featureadd view commit

• fixed syntax for table of contents on changelog #bugfix view commit

• added additional separator between sections added by changelog script #bugfix view commit

---