90d710e41c
chore: add esphome-generated build gitignore
2026-07-11 22:29:19 -07:00
49d0396b57
docs: record Phase 1 hardware bring-up status and deferred items
2026-07-11 22:18:00 -07:00
12b56e3153
fix: route logger through UART0 instead of USB_SERIAL_JTAG
...
Waveshare's board wires log output through the same UART USB-C port
used for flashing. ESPHome's default hardware_uart for ESP32-S3 is
USB_SERIAL_JTAG, which is a separate physical port on this board,
so log output was going nowhere the flashing tool could see it.
2026-07-11 22:11:14 -07:00
3d2172317c
feat: add thermostat climate entity wiring BME280 sensor to relay outputs
2026-07-11 20:08:59 -07:00
db096462be
feat: add 5-channel relay GPIO outputs for HVAC control wiring
2026-07-11 20:07:30 -07:00
58798d5751
feat: add BME280 ambient temperature/humidity/pressure sensors
2026-07-11 20:06:21 -07:00
c4906da25a
feat: add RGB panel display and GT911 touch config for Waveshare 7"
2026-07-11 20:02:49 -07:00
bb3249e166
feat: scaffold ESPHome project for Waveshare ESP32-S3 7" thermostat
2026-07-11 19:53:54 -07:00
d9478bd904
docs: add phase 1 hardware research notes and pin assignments
2026-07-11 19:50:18 -07:00
